Priced per metre. Light Cable to suit your Voyager Trailer. If you are replacing your existing wire, try taping the new length to the existing length and then pulling through the trailer until the old length is right out. If the old cable has already been removed prior to installing try using a length of number eight wire to feed through the chassis, using it then to pull the new cable through.
Note some older Voyager models have holes on the underside of the splice (where the drawbar meets the chassis) which the cable will need to be threaded out and then back into the drawbar. More recent Voyager trailers have a connecting internal passage.
|
Click here to enlarge image
Quantity:
|